Acoustic Image - Focus 2R (800W) Series III
Technical Specifications

Back to Focus 2r | Acoustic Image Home


SYSTEM
Frequency Response 20 Hz - 20 kHz, +/- 0.5 dB
Distortion < 0.5% full output, < 0.1% typical
Hum and Noise -85 dB or better
AC Power 115V/50Hz, 230V/50Hz, switchable (Japan version 100V, 50/60Hz only)
Size 10.2" W x 8.2" D x 3.5" H
Weight less than 5 pounds
PREAMP [mic and instrument inputs through combo jack]
Mic input 600 ohm balanced, XLR connector
Phantom power 38 volts, on/off switch w/LED indicator
Instrument input 1 Megohm impedance, 1/4" jack
Direct out + 4dB, balanced, XLR connector, ground lift, pre/post EQ selector
Effects loop Parallel type with return level control
Bass control Shelving type, + 15dB @ 60 Hz
Mid control + 15 dB @ 650 Hz
Treble control Shelving type, + 25dB @ 10 kHz
Notch filter > -18dB sweepable from 30 to 800 Hz
Low cut filter -12 dB / octave, sweepable from 30 to 800 Hz
EFFECTS
Type Digital with 6 presets and level control
Program presets 3 reverb(hall, room, plate), delay, ambient chorus, flange
POWER AMP
Topology Class D, (PWM)
Switching Frequency 200 kHz
Output Power > 450 Watts (8 ohm), > 800 (4 ohm), >1000 W (2 ohms)
Minimum Load 2 ohms
Output Connectors Neutrik Speakon type (pole 1)
INCLUDED ACCESSORIES Gig Bag with shoulder strap, 6 foot Speakon to 1/4" cable
AVAILABLE ACCESSORIES twist-lock to twist-lock speaker cables
twist-lock to 1/4 inch speaker cables

Valid HTML 4.01!